This is a high-definition digital camera with an automatic monitoring, monitoring shooting, surveillance.
Hunting camera with pyroelectric sensors animal (human) sensor technology to automatically capture high-resolution (16 million pixels) and smooth video. This camera will be in power-saving state when not detected hunting animals (humans). It consumes 100 microamps; it can stay a state of alert in a long time. It also can automatically capture high-quality (up to 16 million pixels) or record video (WVGA), a mobile device can send a picture of the network. When it started to take infrared (black and white) photos and videos, it comes with a 2-inch color screen of the camera and sound recorder, speakers inside, which is more convenient to use. Laser pointers are used to more accurately scan target, support MMS / SMS / Email via transmission network.
Image Sensor |
8 Mega Pixels Color CMOS |
Memory |
TF Card to 32GB(not included) |
Lens |
F=3.1; FOV=120 ° |
Size |
145mm * 80mm * 55 mm |
IR-cut |
Full Automatic IR Filter |
Display |
2.0 inch |
LEDs |
Low Glow 940nm IR LED |
PIR Detect Angle |
120 Degrees |
Night Vision Range |
65ft/20meters |
IR LED |
24 LEDs |
PIR Distance |
65ft/20 meters |
Trigger Time |
0.5second |
PIR delay |
1/5/10/30sec/min (default 1 sec) |
Image resolution |
16MP/12MP/8MP |
Multiple shot |
1/3/6/9 |
Video Resolution |
1080P/720P/VGA |
File Format |
JPEG/AVI |
Selectable Image Resolution |
Yes |
Multiple Photo on one detection |
Yes |
Password Security |
4 digital PIN code |
Frequency Bands |
2G GSM 850/900/1800/1900 MHz |
Remote Control |
SMS |
GPRS transmission |
Data transfer by email |
MMS to phone |
1-4 phone number |
MMS to e-mail |
1-4 email address |
standby power consumption |
0.2mA |
Max Standby time |
6Months (8X AA) |
Interface port |
USB 2.0; TF Card Holder; 9V DC External |
Accesories |
Belt |
Working temperature |
-30 ~+70℃ |
Power |
8×AA battery(not included) |
Waterproof |
IP56 |
Certificate |
FCC,CE,RoHS |
Package Includes:
Hunting camera X1
CD X1
Antenna X1
Remoter X1
USB cable X1
Strap X1
Manual X1
Note:
– Please insert the TF card when the camera is power off.
– Please do not insert or take out the TF card when the camera is power on.
– Recommended formatting the TF card by the camera when used at the first time.
– The camera will be in USB mode when connected to a USB port of a computer. In this case, the TF card function as a removable disk.
– Please ensure sufficient power when having firmware upgrade, otherwise the upgrade process could be interrupted incorrectly. If any fault occurs after improper upgrading process, the camera may stop function properly.